Training data quantity and quality greatly affect object detection model performance, regardless of model architecture. When using object detection models on video and images from the deep sea, in which the objects of interest, primarily organisms, are sparse, faint, and hard to identify, incremental improvements to object detector performance may require an iterative approach to data labeling and management. This paper presents mbariml, a python-based video and image analysis pipeline built around the data labeling management process. mbariml uses an Ultralytics YOLO detection model, runs it over still images or video, stores every detection as a reviewable region of interest, groups those regions by visual similarity so that a human can accept or reject them in bulk, and exports the result as training data, statistics, image sidecars, and additional metadata. The human review stage is the centre of the design: an annotator can validate, relabel, resize, delete, and draw entirely new localizations, and every one of those edits is written back to the same database the detector wrote to. Video receives particular attention: the software treats each tracker-produced track as a provisional observation and selects one representative frame instead of retaining every detection in the track. We describe the pipeline stage by stage, including the operational middle-third heuristic used for track observation selection.
https://arxiv.org/abs/2609.25500
Sycophantic agreement in language models refers to the tendency to overly affirm a user's stated beliefs or preferences, often at the expense of factual accuracy. Although it is widely recognized as an alignment failure, its underlying mechanisms remain poorly understood. In this work, we use causal mediation analysis to identify the mechanisms behind sycophantic agreement. We show that a stated opinion is incorporated into the residual stream of the final prompt token early, where it biases subsequent answer retrieval. A sparse set of early attention heads carries this opinion signal. Ablating these heads substantially reduces sycophancy while leaving factual accuracy largely intact. The same heads carry the opinion when it is explicitly stated, regardless of how it is phrased. When an opinion is not stated explicitly but instead conveyed through content-free pushback (e.g., ``Are you sure?"), we find a distinct set of heads that suppresses the model's original correct answer to promote a revised answer. By providing a mechanistic account of how opinions induce sycophantic agreement, this work takes a step toward developing more targeted and reliable alignment interventions.
https://arxiv.org/abs/2609.35822
Consistent multi-view object segmentation is critical for 3D perception and robotics, yet remains challenging under severe viewpoint and occlusion changes. Existing methods typically perform 3D instance segmentation on point clouds or rely on offline 2D mask-matching pipelines. However, 3D instance segmentation is limited by scarce 3D annotations, while offline 2D matching suffers from object identity ambiguity across frames. To leverage strong 2D and 3D priors jointly, we propose SAM-V (Geometry-Aware Segment Anything for Multi-View Instance Segmentation). Instead of combining the two priors through post-hoc matching, SAM-V directly integrates features from a feed-forward geometry model (VGGT) into a 2D segmentation foundation model (SAM), trained end-to-end for cross-view instance prediction. SAM-V introduces a prompt-fusion mechanism that enriches sparse SAM prompt tokens with view-specific camera tokens and local VGGT features, making the prompt representation both view-aware and spatially grounded, together with a mask decoder that attends to dense 2D and 3D features. By conditioning the mask decoding directly on multi-view geometry, SAM-V produces consistent multi-view segmentation of a prompted object in a single forward pass without offline mask matching or explicit 3D reconstruction. On the IGGT 3D tracking benchmark, where consistent instance identity across frames directly determines performance, SAM-V improves overall IoU by 5 points and frame-level recall by 12 points on the ScanNet++ split over the state-of-the-art multi-view instance segmentation baseline and leads on all metrics in the zero-shot ScanNet split. Our code and pretrained models are available at this https URL.
https://arxiv.org/abs/2609.25490
Geographic measurements are often sparse, leaving large areas without labels for the quantities we want to map. Geographic implicit neural representations (INRs) address this by learning smooth, general-purpose embeddings that can be queried at any coordinate. Downstream models combine these embeddings with sparse labels to predict target values at unsampled locations without satellite imagery at inference. However, generalization to distant regions remains largely unexplored, despite its importance for remote sensing applications. We introduce Matryoshka Implicit Neural Distillation (MIND), which distills embeddings from specialist pretrained geospatial models into a single generalist coordinate embedding with adjustable spatial granularity. MIND uses nested supervision at several embedding dimensions, which define a series of contiguous chunks. In our experiments, early chunks capture coarser geographic variation, while later chunks add more fine-grained details. A downstream predictor can retain only leading chunks or be fitted with our Chunked Penalty to downweight later chunks while keeping the full embedding, without retraining the INR. To measure MIND and compare to existing approaches around the world, we introduce CoordBench, a large-scale INR evaluation suite of $52$ datasets and $78$ targets that aims to test both local interpolation and prediction in held-out regions at various spatial scales. MIND and its Chunked Penalty variant achieve the highest aggregate regression and classification scores among tested INRs, and the highest scores overall under regional holdout, setting a new state-of-the-art for geographic INRs.
https://arxiv.org/abs/2609.25454
Global point-cloud registration remains challenging when limited overlap, repetitive geometry, and sensor noise produce correspondence sets dominated by outliers. Planar regions are particularly difficult for conventional point descriptors and are therefore often suppressed or discarded before matching. We present PARTE (Plane-Assisted Robust Transformation Estimation), a global registration method that instead treats planar structure as complementary registration evidence. PARTE extracts planar patches and represents them using our novel Plane Context Histogram (PCH), a descriptor that encodes the geometry surrounding each patch, while a two-level matching procedure identifies reliable plane correspondences. Candidate point and plane correspondences are combined in a confidence-weighted compatibility graph for joint outlier rejection, followed by rigid transformation estimation. When no usable plane correspondences are available, PARTE naturally reduces to point-only registration. We evaluate PARTE on 8,097 registration pairs across six indoor and outdoor benchmarks spanning dense RGB-D and sparse LiDAR measurements. Evaluations show PARTE achieves the highest overall success rate against 13 standard and state-of-the-art methods while maintaining low runtime. An open-source C++ implementation with Python bindings is provided at this https URL.
https://arxiv.org/abs/2609.25375
Robot assistants for older adults and people with disabilities need to perform collaborative tasks with users effectively. The core component of these systems is an interaction manager whose job is to observe and assess the task and infer the state of the human and their intent for the robot to choose the best course of action. Due to the sparseness of the data in this domain, the policy for such multimodal systems is often crafted by hand; as the complexity of interactions grows, this process is not scalable. This paper proposes a reinforcement learning (RL) approach to automatically generate the multimodal policy of the robot. Our system focuses on a realistic scenario where a robot assists a user in locating objects within a home environment, managing multimodal signals, including language and physical actions, to select the best action. In contrast to traditional dialog systems, our agent is trained with a simulator that uses human data and can deal with multiple modalities. We use a simple high-level reward function that needs no fine-tuning and enforce some preconditions to speed up the training process. A human study evaluating the system in a real-world setting demonstrates promising results, indicating high usability and effective task completion. This RL-based approach offers a scalable and interpretable alternative for designing interaction managers in multimodal human-robot collaborations.
https://arxiv.org/abs/2609.25274
Cosserat rod models for soft robots usually construct sectional stiffness by summing material properties over a common cross-section. This assumption becomes inaccurate for trimmed helicoid arms, where load-bearing helix domains are separated and connected only through sparse fused crossings. This paper formulates a separated-section constitutive law that evaluates each helix domain in its local frame and pulls its constitutive response back to the backbone, yielding an effective backbone stiffness. Sparse-fusion mechanics captures the additional compliance caused by relative motion between neighboring domains and determines channel-wise reduction profiles $\eta_c(s/L)$ for bending, torsion, and extension. The resulting effective sectional stiffness is strongly anisotropic: bending and extension are reduced by about one order of magnitude, whereas torsion remains close to the effective backbone stiffness. The resulting sectional law is embedded in a geometrically exact dynamic Cosserat model with GVS discretization and routed-tendon actuation. Across 103 measured configurations, the three datasets give pooled normalized position errors of \SI{7.7}{\percent}, \SI{6.7}{\percent}, and \SI{7.8}{\percent}, while each full-arm solve requires approximately \SI{0.3}{s} on one CPU core (Intel Xeon, Cascade Lake, \SI{2.8}{GHz}), enabling rapid model-based planning, state and load estimation, and morphology--control co-design for architected soft robots.
https://arxiv.org/abs/2609.25264
Feed-forward 3D reconstruction models enable efficient geometry estimation from sparse images, but their pretrained nature can make them vulnerable to distribution shifts beyond their training data. Identifying these failure modes is important for understanding when such models can be reliably deployed in unconstrained imaging settings. We investigate viewpoint variation as a controlled distribution shift by varying the angular span of sparse image inputs while keeping the input budget fixed. Across multiple feed-forward reconstruction models, we observe substantial degradation as viewpoint span increases, with wide spans producing both incomplete surface coverage and geometry unsupported by the observed imagery. These results reveal that viewpoint variation can induce failure modes beyond conventional reconstruction incompleteness, highlighting the need to evaluate pretrained feed-forward models under distribution shifts that challenge their learned geometric priors.
https://arxiv.org/abs/2609.24839
Mesopic and low-light display transforms require, as their driving signal, a per-pixel scotopic-to-photopic luminance ratio (S/P); the exact spectral S/P is unavailable for ordinary RGB content, so a low-cost closed form that estimates S/P from a linear-RGB triplet is used in its place. Such closed forms exist but have been characterized only on narrowband / LED sources, i.e. spectrally sparse spectra, where a relative error of ~41% has been reported for a three-channel projection. Display content, however, is natural and broadband. We ask whether the same closed form is adequate there, using per-pixel spectral S/P from hyperspectral imagery as ground truth. On a daylight radiance time-series, a six-scalar closed form (three photopic and three scotopic channel weights) reproduces spectral S/P with a median error of ~0.07 that is time-invariant once the RGB input is chromatically adapted to D65; evaluated in un-adapted sRGB the error instead carries a color-temperature tilt across illuminants (~0.19), so adaptation is the enabling step for this use case. The result generalizes to an independent fifty-scene set (pooled median 0.024; 45/50 scenes within a pre-registered 0.10 band), with the few exceedances concentrated in saturated, spectrally-peaky surfaces that approach the narrowband regime (floral close-ups in this set). The scotopic weight vector is shown to be primary-model dependent, but the value used here is corroborated by a primary-free XYZ projection, and the median error stays within the band across all principled coefficient choices. We do not claim observer-validated appearance fidelity or adequacy on narrowband sources; both are out of scope. Both outcomes follow from the same three-channel projection: it is overwhelmed by spectrally sparse inputs and adequate on spectrally smooth ones.
https://arxiv.org/abs/2609.24819
AI governance increasingly requires providers and public authorities to reason about multiple AI instantiations, alternative versions, and deployment configurations of multiple AI systems. Yet current regulation remains predominantly single-system-centric, acknowledging such multiplicity only sparsely without treating collections of related AI systems as governance objects. This creates an AI population governance problem: determining which instantiations can be meaningfully considered together and how their changing configurations can be represented and monitored. The first requirement has recently been addressed through trustworthiness-based accounts of AI identity. We address the second by introducing convex AI compositionality: a formal representation of the configurations generated by finite AI system populations that uses convex spaces. The core idea is that convex compositions of the operational states that a population of AI system instantiations may occupy over time are compatible with lifecycle reachability across the population and can preserve the formal identity relations between these systems. Well-known statistical and geometric constructions, such as weighted state distributions and convex hulls, become AI governance tools for distinguishing operational states, population weights, heterogeneity, and AI configuration change across different governance modes while remaining compatible, under stated conditions, with lifecycle reachability and AI identity. We illustrate our AI population governance framework through distributed healthcare deployments and controlled deployment of recruitment AI variants.
https://arxiv.org/abs/2609.24784
Diffusion-weighted imaging (DWI) remains highly vulnerable to subject motion, particularly in time-efficient protocols and in motion-prone populations. While slice-to-volume registration (SVR) can mitigate inter-slice and inter-stack misalignment, diffusion MRI introduces additional complexity due to diffusion-direction-dependent contrast and the requirement to align dozens of measurements within a common reference frame, effectively yielding a 4D registration problem. Existing approaches rely primarily on sequential modeling or pairwise similarity and often degrade under sparse gradient sampling or severe motion. We introduce GraphSVR, a q-space-aware graph-based framework for 4D SVR registration in DWI. GraphSVR represents slice groups as nodes in an acquisition-structured graph, with edges encoding temporal proximity, spatial slice geometry and diffusion encoding relationships. A graph neural network predicts globally consistent stack-wise rigid motion, optimized in a self-supervised, zero-shot manner using only an anatomical reference image, without requiring paired ground-truth motion. We evaluate GraphSVR using both fully synthetic diffusion simulations and realistic recombination-based simulations from real acquisitions with controllable motion severity and gradient sparsity. Performance is quantified using grid error (mm) and rotation error relative to known ground-truth transforms. Under severe motion, GraphSVR reduces grid error and rotation error by 73% compared to FSL eddy, the standard DWI motion-correction method, with the largest gains observed in sparse-direction regimes. These results demonstrate that explicitly modeling acquisition structure through graph-based reasoning improves robustness and global consistency in 4D DWI motion estimation. Code is available at this https URL.
https://arxiv.org/abs/2609.24732
Robotic perception often requires solving large nonlinear least-squares (NLS) problems. While sparsity has been widely exploited to scale solvers, a complementary and underused structure is \emph{separability}: some variables, such as visual landmarks, appear linearly in the residuals and admit a closed-form solution once the remaining variables, such as poses, are fixed. Variable projection (VarPro) exploits this structure by analytically eliminating the linear variables, yielding a reduced problem with favorable computational properties. However, its use in robotic perception has been limited by gauge symmetries, such as invariance to global translations and rotations, which introduce challenges for standard VarPro methods. We present SPARSER (\textbf{S}parsity \textbf{P}reserving \textbf{A}nalytic \textbf{R}eduction for \textbf{S}eparable \textbf{R}obotic \textbf{P}erception), a VarPro framework for gauge-symmetric problems that jointly exploits separability and sparsity. Our method constructs a \emph{matrix-free Schur complement operator} for efficient evaluation of reduced costs, gradients, and Hessian-vector products, enabling integration with iterative NLS solvers. We characterize the applicable problem class, identify common cases admitting further analytical simplifications, and show that IRLS-based robust costs preserve most of the exploitable structure. Across synthetic and real SLAM, SNL, and SfM benchmarks, SPARSER is on average $5\times$--$7\times$ faster than state-of-the-art baselines on CPU and GPU, with gains exceeding $40\times$ on individual datasets. On outlier-corrupted multi-robot SLAM data, the robust variant is $2\times$--$16\times$ faster than a state-of-the-art GNC solver. We release open-source C++ code and all datasets.
https://arxiv.org/abs/2609.24708
Repeated execution of the target model during autoregressive decoding is a major source of LLM inference latency. Unlike linear speculation, which follows a single candidate chain, tree-structured speculation retains multiple branches from shared prefixes; under the same budget, this broader coverage can improve acceptance and efficiency. Adapting it to DeepSeek-V4 is nontrivial: its CSA/HCA online compressed attention concentrates the difficulty on the target-verify side, where branches diverging from a shared prefix compress into different states, breaking cross-branch state consistency. We integrate tree-structured speculative decoding into the DeepSeek-V4-Flash pipeline via branch-aware causal verification, temporary state isolation, and accepted-path state refresh, keeping verification and compressed-state updates consistent across branches. Across budgets D=5 to D=8, batch sizes 1 to 64, and three datasets (GSM8K, MBPP, ShareGPT), tree speculation achieves a higher accepted length than the matched linear configurations in all settings (e.g., at D=8 about 2.83--3.41 versus 2.39--2.84) and improves throughput in nearly all configurations---marginal only at the smallest budget---by up to about 18.5%. More importantly, the gains follow stable, transferable regularities: the relative gain grows with the budget and is most pronounced for less predictable workloads at small-to-medium batch sizes, while beyond a certain budget throughput plateaus and decouples from the still-rising accepted length. These results show that retaining multiple candidate paths under the same budget can effectively improve DeepSeek-V4 decoding efficiency, and offer experience for adapting speculative decoding to future models with compressed, sparse, or structured context representations.
https://arxiv.org/abs/2609.24698
Language models can be adapted by changing the computations applied to individual tokens. Quantum circuits offer one such approach, but evaluating wider circuits inside a large model can be computationally demanding. Here we introduce HyperQ, which adds token-conditioned quantum residual branches to a frozen masked-diffusion language model. A quantum residual branch is a module in each transformer block that reads a token's hidden state, emits the coordinates of that token's circuit, executes it, and adds the measured values back through a residual connection. The backbone remains frozen, and only the added branches are trained. Within each branch, a lightweight circuit hypernetwork emits token-specific rotation angles, coupling strengths, and measurement axes in a shared sparse circuit structure. The required expectation values have an exact classical expression whose evaluation cost grows linearly with the qubit count, enabling circuits from 16 to 64 qubits to be trained within a 1.1-billion-parameter backbone. Across downstream benchmarks, increasing circuit width raises the average score from 47.65 to 54.30. At 64 qubits, HyperQ exceeds the backbone and its low-rank-adapted counterpart by 4.71 and 3.67 points, respectively. HyperQ is fine-tuned on 20,000 prompt-response pairs, compared with 200,000 for the classical baselines. These findings support token-conditioned circuit emission as a tractable architectural approach to quantum-augmented language modelling.
https://arxiv.org/abs/2609.24657
Nitrogen dioxide (NO2) is a common air pollutant, released into the atmosphere through the incomplete burning of fossil fuels, and associated with respiratory and cardiovascular diseases in humans. Ambient NO2 concentrations are regulated through air-quality limits assessed with a sparse network of fixed monitors. The revised EU Ambient Air Quality Directive (2024/2881) introduces a daily NO2 limit to be met from 2030. At present, neither the regulatory monitoring network nor existing coarse, annual-mean models can resolve NO2 concentrations at the spatio-temporal resolutions necessary to assess compliance. Here we map NO2 across Europe at hourly and 10m resolution with a machine-learning model that combines ground monitors with satellite, reanalysis, land-use, traffic and emission data and returns a calibrated predictive distribution at every location. Validated against held-out regulatory monitors and independent citizen-science campaigns, the maps resolve high-resolution spatiotemporal NO2 gradients for 110 metropolitan areas in Europe. We reconstruct the daily compliance statistic across those regions and find limit breaches in 91 EU air quality zones deemed compliant by the regulatory monitoring network, covering a population of approximately 135M. Beyond air quality zones and monitor locations, an estimated 9-9.4% (20M) of the population in mapped regions lives in areas where the daily NO2 limit is breached. The high-resolution maps offer a route to population-scale assessment of compliance with the 2030 limits.
https://arxiv.org/abs/2609.24634
Robot manipulators are monitored by constraint-specific indicators whose units and gradient scales are not comparable, so they do not provide a common measure of the configuration-space motion remaining before violation. We define the feasibility distance field (FDF) as the distance, under a fixed positive-definite joint-space metric, to the union of infeasible configuration sets. Classical distance-to-set theory gives 1-Lipschitz continuity, almost-everywhere differentiability, and unit dual-gradient norm wherever the nearest projection is unique. The robotics contribution is an admissibility analysis showing when practical constraints define non-empty closed sets. We derive admissible formulations for external and self-collision, joint limits, dexterity, Cartesian and task-projected compliance, joint torque under payload, and dynamic manipulability. Since every field uses the same metric, heterogeneous constraints compose by a pointwise minimum, conditioned constraints retain a fixed distance space, and multi-robot constraints produce block-sparse gradients that identify which robots must react. We generate projection-based labels and train neural approximations with a distance loss and an Eikonal penalty. Simulations on a UR5e and a dual-arm cell evaluate seven fields using value, projection, sign, gradient, composition, and moving-obstacle diagnostics. Across 8,000 configurations, the largest feasible-side secant ratio is 0.920, mean learned gradient norms range from 0.994 to 0.998, and projection residuals range from 0.011 to 0.034 rad. Across 24 random obstacle paths, the external and composed collision fields achieve 90.4% and 91.6% success within 3 cm, with sign-error rates below 2%. The results support a common configuration-space margin and identify approximation errors near medial axes and sparsely sampled boundaries.
https://arxiv.org/abs/2609.24632
Autonomous parking in nonconvex and narrow environments remains challenging. Although optimal-control methods can explicitly enforce vehicle dynamics and collision constraints, nonconvexity compromises solver robustness and can cause failures. Large language models (LLMs) exhibit strong semantic reasoning capabilities, but directly generating dense trajectories makes it difficult to guarantee physical feasibility. We introduce SE-LLM-OCP, a unified framework in which LLMs make high-level discrete maneuver decisions, while an optimal-control module enforces low-level vehicle dynamics and collision constraints. Online, the LLM proposes sparse maneuver plans, decomposing the parking task into a sequence of short-horizon trajectory-optimization problems. A low-level solver then sequentially solves optimal-control problems. If the solver fails, the LLM aggregates failure evidence from the solver and validation stages to guide replanning. Offline, SE-LLM-OCP automatically evolves a structured decision-making knowledge base from scratch, driven by accumulated online failures. We validate our proposed framework in simulation on a car-like vehicle model and on a differential-drive robot. Our experimental results show that SE-LLM-OCP enables safer autonomous parking in narrow scenarios and demonstrates transfer of the same maneuver representation to a different kinematic platform.
https://arxiv.org/abs/2609.24631
Tactile sensing is increasingly being incorporated into learning-based robotic manipulation, yet many existing approaches rely on spatially distributed sensors. Here we introduce SpectRobot, a framework that transforms single-point tactile signals into compact time-frequency spectrograms. These spectrograms encode high-bandwidth tactile histories as fixed-size image-like representations. They can be processed by standard vision encoders and integrated into learning pipelines originally developed for vision, while preserving temporal and frequency information unavailable to conventional cameras. Rather than increasing spatial density through arrays of tactile elements, SpectRobot exploits the rich dynamics contained in sparse, high-bandwidth single-point measurements. In our implementation, the sensors are mounted away from the contact surface while remaining mechanically coupled to it, reducing direct exposure to wear and potentially improving robustness in harsh environments and for long-term deployment on dexterous robots. Our experiments demonstrate that: (1) a robot can exploit single-point vibration signals to solve a visually occluded manipulation task; (2) temporal history strongly influences policy performance, while sensing bandwidth controls the spectral information available, with measurements extending to 100~kHz; and (3) the same representation can be used across different tactile sensing technologies mediated by acceleration, force, or strain. We further show that capabilities previously associated with research-grade instrumentation can be accessed using readily available, off-the-shelf hardware. We believe that broader access to high-bandwidth tactile sensing could facilitate the integration of contact dynamics into embodied learning systems and, for some tasks, offer an alternative or complement to increasing the spatial density of tactile sensing.
https://arxiv.org/abs/2609.24621
Multi-modal object Re-Identification (ReID) benefits from complementary information across heterogeneous imaging modalities. To further enrich semantic representation, text descriptions have recently been incorporated as an additional modality. However, recent vision-language approaches often treat text descriptions as clean, deterministic signals and overlook their inherent noise, including modality-mismatched phrases and semantically ambiguous expressions. Moreover, prevailing methods lack explicit mechanisms to reconcile fine-grained structural discrepancies between modalities, even after high-level semantic alignment. To address these challenges, we propose a novel framework centered on Positive-Incentive Noise ({\pi}-noise) and structured prompt modulation. First, the Semantic Cross-Modal Modulator harnesses task-aware {\pi}-noise, sampled from a distribution conditioned on both visual and text inputs, to perturb global tokens and enable semantics-guided cross-modal compensation. Second, the Structure-Aware Prompt Adapter injects learnable geometric priors via prompts to enhance spatial consistency. Third, the Context-Aware Sparse Fusion module distills structural context to guide adaptive fusion while shielding identity features from noisy local details. Experiments on three multi-modal ReID benchmarks demonstrate the effectiveness and robustness of our approach. The code is available at this https URL.
https://arxiv.org/abs/2609.24539
Real-time motion planning remains challenging in large and high-dimensional environments. Prior acceleration of RRT* follows tree-centric state organization, which reduces per-query cost but preserves superlinear end-to-end complexity and limits parallelism through structural dependencies. This paper presents ScaleMPA, a motion-planning accelerator that rethinks RRT* with a grid-native representation. By replacing hierarchical traversal with direct grid-based access, ScaleMPA reduces the planner critical path and exposes fine-grained parallelism. To make this reformulation practical under sparse high-dimensional planning, ScaleMPA further proposes a multi-resolution grid search engine and a hash-grid memory system. Implemented in 28 nm CMOS, ScaleMPA achieves millisecond-level planning latency and delivers 4.7$\times$--44.4$\times$ speedup over state-of-the-art motion-planning accelerators.
https://arxiv.org/abs/2609.24497