Stereo image super-resolution aims to generate high-resolution images by leveraging complementary information from binocular systems. Although previous studies have achieved impressive results, the potential of intra-view and cross-view information has not been fully exploited. To address this issue, we propose a novel multi-scale interaction network for stereo image super-resolution. Specifically, we design a Multi-scale Spatial-Channel Attention Module that utilizes multi-scale large separable kernel attention and simple channel attention to improve intra-view feature extraction. Additionally, we propose a Dual-View Epipolar Attention Module, utilizing an optimal transport algorithm to achieve more accurate matching along the epipolar line. Extensive experimental and ablation studies show that our method achieves competitive results that outperform most SOTA methods.
https://arxiv.org/abs/2605.21913
Hyperspectral super-resolution (HSR) reconstructs a high-spatial-resolution hyperspectral image by fusing a low-resolution hyperspectral image (LR-HSI) with a high-resolution multispectral image (HR-MSI). In the absence of real-world paired data, HSR methods are evaluated almost exclusively on synthetic experiments derived from hyperspectral datasets through Wald's protocol. Despite the protocol's widespread adoption, its practical implementation varies markedly across research works, typically relying on a single (usually Gaussian) or very few point spread functions (PSFs), one or two spectral response functions (SRFs), and a couple of spatial downsampling factors. As a result, reported performance figures are difficult to compare across the literature, in addition to being often difficult to reproduce; furthermore, they may not generalize across realistic sensing conditions. We introduce HyperBench, a unified and extensible framework that standardizes synthetic experimentation for HSR. HyperBench supports diverse degradation configurations spanning ten PSFs, four SRFs derived from operational multispectral sensors, configurable spatial downsampling factors, and matched additive white Gaussian noise; its goal is to automate large-scale evaluation and structured logging. By decoupling model development from experimental design, the framework enables reproducible, apples-to-apples cross-method comparison with minimal friction. We use HyperBench to evaluate six recently proposed HSR methods across a 70-configuration sweep on four widely used hyperspectral scenes and observe that the inter-method PSNR spread widens from approximately 5 dB on the easiest PSF to over 13 dB on the hardest - a fragility that is structurally invisible to the prevailing single-configuration evaluation protocol. HyperBench code is available at this https URL .
https://arxiv.org/abs/2605.21671
Adapting pretrained diffusion models to downstream objectives such as inverse problems often requires expensive test-time guidance or optimization. We propose a principled framework for generating high-quality reward-aligned samples at substantially reduced inference cost. Our approach formulates test-time adaptation as a hierarchical variational model, where control is amortized into a lightweight yet expressive stochastic policy. This formulation naturally supports few-step diffusion sampling: large step sizes enable fast inference, while the learned policy maintains sample quality by providing structured per-step control. The resulting fully amortized sampler achieves a strong quality--speed tradeoff, matching or exceeding recent test-time scaling baselines while requiring significantly less compute. For example, on 4x super-resolution, our method achieves better perceptual quality with more than 5x faster inference compared to the best-performing baseline. We further extend our approach to a semi-amortized regime that combines cheap amortized proposals with limited test-time optimization, achieving state-of-the-art perceptual quality across several challenging inverse problems.
https://arxiv.org/abs/2605.21661
Super-Resolution (SR) has advanced rapidly in recent years, with diffusion-based models achieving unprecedented fidelity at the cost of introducing new types of visual artifacts. While existing Image Quality Assessment (IQA) methods provide holistic quality scores, they lack interpretability and fail to distinguish between different artifact types arising from modern SR approaches. To address this gap, we introduce SR-Ground, a large-scale dataset specifically designed for fine-grained artifact segmentation in super-resolved images. The dataset comprises images processed by a diverse set of state-of-the-art SR models, with pixel-level annotations for multiple artifact categories. We conduct a large-scale crowdsourcing study involving 1,062 participants to validate and refine automatically generated segmentations, resulting in a high-quality dataset of 63,000 images spanning 6 distinct artifact types. We demonstrate that training IQA models with grounding capabilities on SR-Ground significantly improves performance on downstream tasks. Furthermore, we introduce a fine-tuning pipeline that leverages our grounding model to reduce perceptible artifacts in SR outputs, showcasing the practical utility of our dataset.
https://arxiv.org/abs/2605.21244
We introduce GaussianZoom, a generative zoom-in 3D reconstruction system with an iterative progressive framework that combines geometry-consistent scene modeling and multi-scale semantic reasoning to enable high-fidelity extreme zoom-in rendering from low-resolution inputs. To achieve this, we develop a novel multi-view consistent super-resolution module with depth-based feature warping and VLM-driven detail synthesis, ensuring accurate multi-view correspondence while enriching fine-scale appearance beyond the observed resolution. To support zooming across large magnification ranges, we further introduce a new expandable continuous Level-of-Detail hierarchy that dynamically modulates Gaussian visibility for smooth, alias-free cross-scale rendering. Experiments on Mip-NeRF360 and Tanks\&Temples demonstrate that GaussianZoom achieves superior perceptual quality, multi-view consistency, and robustness under extreme magnification, establishing a strong baseline for generative zoom-in 3D scene reconstruction.
https://arxiv.org/abs/2605.18252
Diffusion-based methods demonstrate significant potential for remote sensing image super-resolution at large scaling factors, particularly in reference-based super-resolution (RefSR) where high-resolution reference images provide critical fine-grained texture priors. However, existing methods often suffer from a trade-off between over-reliance on reference information, which leads to texture artifacts, and underutilization, which results in insufficient detail recovery. To address these issues, we propose DS-DiT, a Decoupled Siamese Diffusion Transformer method that decouples low-resolution and reference interactions at the attention level. By enabling low-resolution structural priors and reference texture information to interact independently with the noisy latent, the framework effectively mitigates inter-source competition. Furthermore, to compensate for the limited local modeling ability of global attention, we introduce a Patch-Level Weights (PLW) module that adaptively modulates the fusion of conditional sources. In addition, this siamese architecture facilitates an autoguidance strategy during inference, which enhances reconstruction by exploiting the prediction discrepancy between strong and weak reference conditions. This approach boosts generation quality without additional training. Experimental results across multiple datasets and scaling factors demonstrate that DS-DiT outperforms existing methods in both quantitative metrics and visual fidelity.
https://arxiv.org/abs/2605.17980
Assessing the quality of single image super-resolution (SISR) results remains an open methodological problem. Common full-reference metrics (PSNR, SSIM, LPIPS) do not explicitly evaluate the preservation of the geometric structure of images, which is critical for the correctness of scale-based reconstruction. In addition, they require the forced alignment of images to the same size (\textit{forced resizing}), which introduces an external interpolation error into the evaluation process. This paper proposes a diagnostic scale-invariant quality measure, MSIQ (\textit{Moment-based Scale-Invariant Quality}), based on the comparison of normalized central geometric moments of two images. MSIQ enables direct comparison of images with different spatial resolutions without resizing, is mathematically deterministic (\textit{model-free}), and has an analytical form. To provide a theoretical basis for the approach, we introduce a conceptual distinction between the ability of metrics to monotonically track degradation (\textit{tracking ability}) and their geometric selectivity (\textit{geometric specificity}). The experimental validation confirmed the stability of MSIQ under uniform scaling and, at the same time, revealed the high sensitivity of traditional metrics to the choice of interpolation method. The results show that MSIQ has pronounced geometric selectivity: the proposed measure effectively separates geometric deformations from non-geometric artifacts, in particular JPEG compression, unlike pixel-based and perceptual metrics. It is also shown that the response of MSIQ to structural perturbations remains stable across different classes of SR algorithms, including DNN models with different architectures. The proposed measure is a complementary diagnostic tool for domains where geometric fidelity has priority, in particular medical imaging and remote sensing.
https://arxiv.org/abs/2605.17588
Image super-resolution (SR) aims to reconstruct high-quality, high-resolution (HR) images from low-resolution (LR) inputs and plays a critical role in various downstream applications. Despite recent advancements, balancing reconstruction fidelity and computational efficiency remains a fundamental challenge, particularly in resource-constrained scenarios. While existing lightweight methods attempt to expand receptive fields, many of them either incur substantial computational overhead, naively scale up kernel sizes, or lack mechanisms for coherent multi-scale integration, limiting their overall effectiveness and scalability. To address these limitations, we propose EchoSR, an efficient context-harnessing framework for lightweight image super-resolution, which unifies multi-scale receptive field modeling and hierarchical context fusion. EchoSR decouples feature learning into disentangled local, multi-scale, and global modeling stages through an efficient context-harnessing strategy, and further promotes seamless cross-scale integration via a cross-scale overlapping fusion mechanism. Extensive experiments have shown that EchoSR consistently outperforms state-of-the-art lightweight super-resolution methods across multiple benchmarks, while also achieving a faster speed $(\sim 2\times)$. The source code is available at \url{this https URL}.
https://arxiv.org/abs/2605.17470
Audio super-resolution (SR), also referred to as bandwidth extension (BWE), aims to reconstruct high-fidelity signals from low-resolution (LR) or band-limited (BL) observations, an inherently ill-posed task due to the ambiguity of missing high-frequency (HF) content. This survey provides a comprehensive overview of the field, with a particular focus on the paradigm shift from discriminative mapping to modern generative modeling. We first review early discriminative deep neural network (DNN) models, which formulate BWE/SR as a deterministic mapping problem and are prone to regression-to-the-mean effects and spectral over-smoothing. We then systematically review generative approaches, including autoregressive (AR) models, variational autoencoders (VAEs), generative adversarial networks (GANs), diffusion and score-based models, flow-based methods, and Schrödinger bridges. Across these approaches, we examine key design aspects, including representation domain, architecture, conditioning mechanisms, and trade-offs among reconstruction fidelity, perceptual quality, robustness, and computational efficiency. Furthermore, we discuss emerging directions involving large language models (LLMs) and multimodal foundation models, and highlight open challenges in perceptual evaluation, phase modeling, and real-world generalization. By providing a structured taxonomy and unified perspective, this survey establishes a comprehensive foundation and offers a practical roadmap for advancing BWE/SR from deterministic point estimation toward distribution-aware generative modeling.
https://arxiv.org/abs/2605.16681
Clinical application of high-resolution diffusion MRI is hindered by hardware limitations and prohibitive scan times, motivating computational super-resolution. This study investigates the efficacy of a feature-based loss function in preserving diffusion signal consistency in deep learning super-resolution. Using 7T data from the human connectome project to generate pairs of low- and high-resolution diffusion weighted images (DWI), we trained UNets for 2D super-resolution. Ablation and isolation studies evaluated different VGG16-layers for feature-based losses against an image-based L1 baseline. Deeper layers and combinations thereof resulted in grid-like artifacts in super-resolution DWIs, which persisted in diffusion parameters like quantitative and fractional anisotropy. No such artifacts were present when using the shallowest layer. Downstream analysis for this layer showed great consistency with the ground truth, even for 9-fold super-resolution. Image SNR and used VGG16-layer depths modulated artifact appearance and severity, mandating careful selection of contributing layers for application in and beyond diffusion MRI.
https://arxiv.org/abs/2605.15895
Large-scale pre-trained diffusion models have been extensively adopted for real-world image Super-Resolution because of their powerful generative priors through textual guidance. However, when super-resolving high-resolution images with patch-wise inference strategy, most existing diffusion-based SR methods tend to suffer from over-generation, due to the misalignment between the global prompt from LR image and the incomplete semantic information of local patches during each inference step. On the other hand, most existing methods also failed to generate detailed texture in local patches due to the overemphasis on global generation capabilities in network designs and training strategies. To address this issue, we present DreamSR, a novel SR model that suppresses local over-generation and improves fine-detail synthesis, thereby achieving visually faithful results with ultra-high-quality details. Specifically, we propose a dual-branch MM-ControlNet, where the ControlNet generates local textual feature with patch-level prompts while the pre-trained DiT provides global textual feature with global prompts, thereby mitigating over-generation and ensuring semantic consistency across patches. We also design a comprehensive training strategy with stage-specific data processing pipelines and a Receptive-Field Enhancement strategy, enhancing the model's capability to capture patch information and effectively restore local textures. Extensive experiments demonstrate that DreamSR outperforms state-of-the-art methods, providing high-quality SR results. Code and model are available at this https URL.
https://arxiv.org/abs/2605.15682
Solving imaging inverse problems has usually been addressed by designing proper prior models of the underlying signal. However, minimizing the data fidelity term poses significant challenges due to the ill-conditioned sensing matrix caused by physical constraints in the acquisition system. Thus, preconditioning techniques have been adopted in classical optimization theory to address ill-conditioned data-fidelity minimization by transforming the algorithm gradient step to achieve faster convergence and better numerical stability. We extend the preconditioning concept beyond convergence acceleration and use it to improve reconstruction quality. We introduce DIPA: Distilled Preconditioned Algorithms, where a preconditioning operator (PO) is optimized using teacher-guided distillation criteria. Unlike standard model-compression KD, the teacher and student differ by the sensing operators available during reconstruction: the teacher uses a simulated, better-conditioned, and more informative sensing matrix, whereas the student uses the physically feasible sensing matrix. We design different distillation loss functions to transfer different properties of the teacher algorithm to the preconditioned student. The PO can be linear (L-DIPA), allowing interpretability, or non-linear (N-DIPA), parametrized by a neural network, offering better scalability. We validate the proposed PO design across several imaging modalities, including magnetic resonance imaging, compressed sensing, and super-resolution imaging.
https://arxiv.org/abs/2605.15456
We introduce a multi-scale Image Super Resolution (ISR) method building on recent advances in Visual Auto-Regressive (VAR) modeling. VAR models break image tokenization into additive, gradually increasing scales, using Residual Quantization (RQ), an approach that aligns perfectly with our target ISR task. Previous works taking advantage of this synergy suffer from two main shortcomings. First, due to the limitations in RQ, they only generate images at a predefined fixed scale, failing to map intermediate outputs to the corresponding image scales. They also rely on large backbones or a large corpus of annotated data to achieve better performance. To address both shortcomings, we introduce two novel components to the VAR training for ISR, aiming at increasing its flexibility and reducing its complexity. In particular, we introduce a) a \textbf{Hierarchical Image Tokenization (HIT)} approach that progressively represents images at different scales while enforcing token overlap across scales, and b) a \textbf{Direct Preference Optimization (DPO) regularization term} that, relying solely on the (LR,HR) pair, encourages the transformer to produce the latter over the former. Our proposed HIT acts as a strong inductive bias for the VAR training, resulting in a small model (300M params vs 1B params of VARSR), that achieves state-of-the-art results without external training data, and that delivers multi-scale outputs with a single forward pass.
https://arxiv.org/abs/2605.14891
Modern image super-resolution methods generate detailed, visually appealing results, but they often introduce visual artifacts: unnatural patterns and texture distortions that degrade perceived quality. These defects vary widely in perceptual impact--some are barely noticeable, while others are highly disturbing--yet existing detection methods treat them equally. We propose artifact prominence as an evaluative target, defined as the fraction of viewers who judge a highlighted region to contain a noticeable artifact. We design a crowdsourced annotation protocol and construct SR-Prominence, a dataset suite containing 3,935 artifact masks from DeSRA, Open Images, Urban100, and a realistic no-ground-truth Urban100-HR setting, annotated with prominence. Re-annotating DeSRA reveals that 48.2% of its in-lab binary artifacts are not noticed by a majority of viewers. Across the suite, we audit SR artifact detectors, image-quality metrics, and SR methods. We find that classical full-reference metrics, especially SSIM and DISTS, provide surprisingly strong localized prominence signals, whereas no-reference IQA methods and specialized artifact detectors often fail to generalize across datasets and reference settings. SR-Prominence is released with an objective scoring protocol that allows new metrics to be benchmarked on our suite without further crowdsourcing. Together, the data and protocols enable SR artifact evaluation to move from binary defect presence toward perceptual impact. SR-Prominence is available at this https URL.
https://arxiv.org/abs/2605.14847
Face image super-resolution aims to recover high-resolution facial images from severely degraded inputs. Under extreme upscaling factors, fine facial details are often lost, making accurate reconstruction challenging. Existing methods typically rely on heavy network architectures, adversarial training schemes, or separate alignment networks, increasing model complexity and computational cost. To address these issues, we propose a lightweight U-Net based-architecture designed to reconstructs $128{ \times }128$ facial images from severely degraded $16{ \times }16$ inputs, achieving an $8 \times $ magnification. A key contribution is a novel auxiliary-training-free supervision strategy that leverages heatmaps generated by YOLO-World, an open-vocabulary object detector, to localize key facial features such as eyes, nose, and mouth. These heatmaps are converted into spatial weights to form a heatmap-guided loss that emphasizes reconstruction errors in semantically important regions. Unlike prior methods that require dedicated landmark or alignment networks, our approach directly reuses detector outputs as supervision, maintaining an efficient training and inference pipeline. Experiments on the aligned CelebA dataset demonstrate that the proposed loss consistently improves quantitative metrics and produces sharper, more realistic reconstructions. Overall, our results show that lightweight networks can effectively exploit detection-driven priors for perceptually convincing extreme upscaling, without adversarial training or increased computational cost.
https://arxiv.org/abs/2605.14166
Partial differential equations (PDEs) are fundamental for modeling complex natural and physical phenomena. In many real-world applications, however, observational data are extremely sparse, which severely limits the applicability of both classical numerical solvers and existing neural approaches. While neural methods have shown promising results under moderately sparse observations, their inference efficiency at high resolutions is limited, and their accuracy degrades substantially in the extremely sparse regime. In this work, we propose the Di-BiLPS, a unified neural framework that effectively handle both forward and inverse PDE problems under extremely sparse observations. Di-BiLPS combines a variational autoencoder to compress high-dimensional inputs into a compact latent space, a latent diffusion module to model uncertainty, and contrastive learning to align representations. Operating entirely in this latent space, the framework achieves efficient inference while retaining flexible input-output mapping. In addition, we introduce a PDE-informed denoising algorithm based on a variance-preserving diffusion process, which further improves inference efficiency. Extensive experiments on multiple PDE benchmarks demonstrate that Di-BiLPS consistently achieves SOTA performance under extremely sparse inputs (as low as 3%), while substantially reducing computational cost. Moreover, Di-BiLPS enables zero-shot super-resolution, as it allows predictions over continuous spatial-temporal domains.
https://arxiv.org/abs/2605.13790
Image restoration is an inherently ill posed inverse problem. Equivariant networks that embed geometric symmetry priors can mitigate this ill posedness and improve performance. However, current understanding of the relationship between network equivariance and data symmetry remains largely heuristic. Particularly for real world data with imperfect symmetry, existing research lacks a systematic theoretical framework to quantify symmetry, select transformation groups, or evaluate model data alignment. To bridge this gap, we conduct an analysis from an optimization perspective and formalize the intrinsic relationship among data symmetry priors, model equivariance, and generalization capability. Specifically, we propose for the first time a quantifiable definition of non strict symmetry at the dataset level (rather than sample level) and use it as a constraint to formulate the restoration inverse problem. We then show that the equivariance for restoration models can be naturally derived from this inverse problems incorporated the proposed symmetry constraints, and that the equivariance error of the optimal restoration operator is strictly bounded by the data symmetry error and the discretization mesh size. Furthermore, by analyzing the network's empirical risk, we demonstrate that aligning equivariance with data symmetry optimizes the bias variance trade off, minimizing the total expected risk. Guided by these insights, we propose a Sample Adaptive Equivariant Network that uses a hypernetwork and transformation learnable equivariant convolutions to dynamically align with each sample's inherent symmetry. Extensive experiments on super resolution, denoising, and deraining validate our theoretical findings and show significant superiority over standard baselines and traditional equivariant models. Our code and supplementary material are available at this https URL.
https://arxiv.org/abs/2605.13744
Thermal-infrared (TIR) hyperspectral imagery (HSI) provides critical scene information for various applications. However, its practical utility is severely limited by unique sensor degradations beyond the capabilities of existing restoration methods, which are ignorant of underlying thermal physics. Here, we propose HAIR (HADAR-based Image Restoration) as a physics-driven framework for ground-based TIR-HSI restoration. HAIR utilizes the HADAR rendering equation (HRE) and combines it with the atmospheric downwelling radiative transfer equation (RTE) to model TIR-HSI using temperature, emissivity, and texture (TeX) physical triplets. This physical model leads to a TeX decompose-synthesize strategy that guarantees physical consistency and spatio-spectral noise resilience, in stark contrast to existing approaches. Moreover, our framework uses a forward-modeled atmospheric downwelling reference, along with spectral smoothness of emissivity and blackbody radiation, to enable spectral calibration and generation that would otherwise be elusive. Our extensive experiments on the outdoor DARPA Invisible Headlights dataset and in-lab FTIR measurements show that HAIR consistently outperforms state-of-the-art methods across denoising, inpainting, spectral calibration, and spectral super-resolution, establishing a benchmark in objective accuracy and visual quality.
https://arxiv.org/abs/2605.13664
Recent advances have demonstrated that coded aperture snapshot spectral imaging (CASSI) systems show great potential for capturing 3D hyperspectral images (HSIs) from a single 2D measurement. Despite the inherent spectral continuity of scenes captured by CASSI, most existing reconstruction methods are restricted to fixed, discrete spectral outputs, thereby precluding continuous spectral reconstruction or spectral super-resolution. To address this challenge, we propose Phy-CoSF, which synergizes deep unfolding networks with implicit neural representations, establishing a new paradigm for continuous spectral reconstruction and super-resolution in CASSI. Specifically, we propose a two-phase architecture that bridges discrete-wavelength training with continuous spectral rendering, enabling the synthesis of high-fidelity HSIs at arbitrary target wavelengths. At the core of our framework lies the continuous spectral fields (CoSF) module, embedded within each unfolding stage as a dynamic prior, which comprises a triple-branch cross-domain feature mixer for comprehensive spatial-frequency-channel feature fusion, alongside a spectral synthesis head that generates spectral intensities by querying continuous wavelength coordinates. Extensive experimental results demonstrate that Phy-CoSF not only achieves continuous modeling at arbitrary spectral resolutions but also outperforms many state-of-the-art methods in both reconstruction fidelity and spectral detail preservation. Our code and more results are available at: this https URL.
https://arxiv.org/abs/2605.13583
Hyperspectral image (HSI) restoration is crucial for reliable analysis, as real HSIs suffer from degradations like noise, blur, and resolution loss. However, existing models trained on source data often fail on target domains lacking clean references, a common occurrence in practice. To address this issue, we present HIR-ALIGN, a plug-and-play target-adaptive augmentation framework that enhances hyperspectral image restoration by augmenting limited training images with synthetic data that closely matches the target distribution using no extra data. It consists of three stages: (i) proxy generation, where off-the-shelf restoration models restore degraded target observations to produce semantics-preserving proxy HSIs that approximate target-domain clean images; (ii) distribution-adaptive synthesis, where a blur-robust unCLIP diffusion model generates target-aligned RGBs from proxy RGBs, with prompt conditioning and embedding-space noise initialization. Then, a warp-based spectral transfer module synthesizes HSIs by aligning each generated RGB with the proxy RGB, estimating soft patch-wise transport weights, and applying these weights and learnable local interpolation kernels to the proxy HSI; and (iii) aligned supervised finetuning, where restoration networks pretrained on the source distribution are finetuned using both the proxy HSIs and synthesized target-aligned HSIs, and are then deployed on degraded target images. We further provide theoretical analysis showing that augmentation-based finetuning can achieve lower target-domain restoration risk by jointly improving target distribution coverage and controlling spectral bias. Extensive experiments on simulated and real datasets across denoising and super-resolution tasks demonstrate that HIR-ALIGN consistently improves source-only supervised baselines, outperforming both source-only counterparts and representative unsupervised methods.
https://arxiv.org/abs/2605.13581