Wave parameters in the nearshore are crucial for coastal engineering, shoreline protection, marine hazard assessment, and coastal management for climate resilience. Traditional monitoring systems like buoys and radar platforms offer accurate monitoring but can have high installation and maintenance expenses and limited spatial coverage. Passive ocean monitoring using video has been achieved by leveraging deep learning, however, many methods are not physically interpretable, feasible, and validated for oceanography. In thiswork, a Physics-Guided Deep Spatiotemporal Learning Framework for direct estimation of nearshore wave peak periods from passive coastal video stream is proposed. The framework combines automated temporal-variance based region-of-interest detection, multi-stage Sim-to-Real transfer learning, and physics-informed regularization to enhance the predictive accuracy and physical consistency. A variety of spatiotemporal architectures were assessed, such as transformer-based and recurrent-convolutional ones, alongside synthetic pretraining,silver-label adaptation, and expert fine-tuning. The results show that transformer-based architectures outperformed in terms of the accuracy of the instantaneous prediction, while lightweight recurrent-convolutional architectures achieved higher temporal stability and operational oceanographic skill. Ablation studies also demonstrated the benefits of physics-guided regularization in terms of trend-following consistency, and physically implausible predictions. Explainability auditing also helped to focus attention in hydrodynamically active surf-zone regions and showed good agreement with the physically derived wave propagation behavior. In general, the proposed framework shows the promise of physics-guided video-based deep learning systems for long-term coastal wave monitoring that are cost-efficient and operationally feasible.
https://arxiv.org/abs/2606.13302
While researchers continue to find new and improved network structures for CNNs, most of the newly invented architectures still rely on the traditional pattern of stacking convolutional blocks and separating them with pointwise activation functions. However, there are drawbacks to a network purely building on pointwise nonlinearities. One alternative is to introduce a pairwise connection between two filters of a network. Typical connection functions use multiplications or the minimum operation to realize logical AND connections. In this paper, we go one step further by demonstrating that CNNs can benefit from more general connections, which include parameters that are learned. With such parameters, the network is able to implement different connections in different network layers and better adapt the connection function to the task at hand.
https://arxiv.org/abs/2606.13736
In intelligent video surveillance, cameras record image sequences during day and night. Commonly, this demands different sensors. To achieve a better performance it is not unusual to combine them. We focus on the case that a long-wave infrared camera records continuously and in addition to this, another camera records in the visible spectral range during daytime and an intelligent algorithm supervises the picked up imagery. More accurate, our task is multispectral CNN-based object detection. At first glance, images originating from the visible spectral range differ between thermal infrared ones in the presence of color and distinct texture information on the one hand and in not containing information about thermal radiation that emits from objects on the other hand. Although color can provide valuable information for classification tasks, effects such as varying illumination and specialties of different sensors still represent significant problems. Anyway, obtaining sufficient and practical thermal infrared datasets for training a deep neural network poses still a challenge. That is the reason why training with the help of data from the visible spectral range could be advantageous, particularly if the data, which has to be evaluated contains both visible and infrared data. However, there is no clear evidence of how strongly variations in thermal radiation, shape, or color information influence classification accuracy. To gain deeper insight into how Convolutional Neural Networks make decisions and what they learn from different sensor input data, we investigate the suitability and robustness of different augmentation techniques...
https://arxiv.org/abs/2606.13042
Crack detection plays an important role in infrastructure inspection and Structural Health Monitoring (SHM). However, cracks typically appear as thin, low-contrast structures and are easily affected by background noise, posing challenges for existing object detection models. This study proposes an improved YOLO-based architecture with integrated attention mechanisms, termed YOLO-AMC (YOLO with Attention Mechanisms for Crack Detection), to enhance automated crack detection performance. Based on YOLOv11, the original C2PSA module is removed, and multiple attention mechanisms, including Global Attention Mechanism (GAM), Residual Convolutional Block Attention Module (Res-CBAM), and Shuffle Attention (SA), are introduced into the multi-scale feature fusion layers of the Neck to strengthen cross-scale feature integration. Experimental results demonstrate that YOLO-AMC consistently outperforms baseline models YOLOv11n and YOLOv8n across multiple evaluation metrics. Among the evaluated attention modules, GAM achieves the best detection performance, obtaining mAP@0.5 = 0.9917 and mAP@0.5:0.95 = 0.9506 on the test dataset, which are higher than those of YOLOv11 (0.9833 / 0.9112) and YOLOv8 (0.9707 / 0.8921). Furthermore, while maintaining a computational complexity of 7.6 GFLOPs, the proposed model achieves 110.95 FPS on an NVIDIA RTX 4090 platform and approximately 5 FPS on a Raspberry Pi 5 edge device, demonstrating a favorable trade-off between accuracy and deployment efficiency. The implementation code for this study is available on GitHub at this https URL.
https://arxiv.org/abs/2606.12958
In image and surface-based learning tasks, convolutional features are typically extracted using receptive fields that are sampled uniformly across the entire domain. However, informative structures are rarely distributed uniformly in practice and are often concentrated in localized regions. Such phenomena are particularly common in medical imaging, where pathological changes are spatially confined. Consequently, uniform convolution allocates equal computational effort to both informative and uninformative regions, resulting in inefficient feature extraction and suboptimal utilization of model capacity. To address this issue, we propose a framework for task-adaptive sampling that dynamically redistributes computational attention according to the spatial importance of the data. Specifically, we introduce the Density-Equalizing Convolutional Neural Network (DECNN), which employs density-equalizing mappings to guide convolution through a learned density function. The density function encodes the relative importance of different regions and induces a transformation that enlarges informative areas while compressing less relevant ones. As a result, convolutional receptive fields are redistributed non-uniformly over the domain, enabling denser sampling in task-relevant regions. By coupling this importance-driven transformation with convolution, DECNN performs adaptive feature extraction that focuses computational resources on informative structures. This leads to more efficient use of model capacity, yielding a lightweight yet expressive architecture while simultaneously producing an interpretable saliency map. Experiments on image classification and craniofacial surface analysis demonstrate that DECNN achieves competitive or superior performance with fewer parameters, accurately identifies task-relevant regions, and remains robust under complex geometric variations.
https://arxiv.org/abs/2606.12869
Speech enhancement models typically apply uniform capacity across all frequencies, disregarding the non-uniform spectral resolution of human hearing. We propose BASENet, a frequency-adapted architecture that partitions the spectrum into Bark-scale bands and assigns each a scaled-capacity encoder derived from critical-band density, automatically granting deeper branches to perceptually dense low frequencies and lighter ones to high frequencies. A cross-band attention module captures harmonic dependencies across bands through compact frequency-pooled representations at linear complexity. Built on inverted residual blocks with dense connectivity and a convolutional recurrent network, BASENet achieves 3.55 PESQ and STOI~96% on VoiceBank+DEMAND with only 0.83M parameters and 7.3 G~MACs, the fewest parameters among all methods with PESQ > 3.50. A causal variant (3.44 PESQ) surpasses several non-causal baselines, confirming suitability for real-time streaming on resource-constrained devices.
https://arxiv.org/abs/2606.12662
Industrial Internet of Things (IIoT) systems increasingly rely on distributed vibration sensing to support predictive maintenance of rotating machinery. In practical deployments, however, raw signal upload is costly and alarm decisions must be made locally under limited computation, changing operating conditions, and strict nuisance-alarm budgets. This paper presents a reliability-calibrated edge-IoT early-warning framework, in which a compact Physics-Guided Tiny-Mamba Transformer (PG-TMT) acts as the representation module and an extreme value theory (EVT) layer converts streaming anomaly scores into event-level alarm episodes. PG-TMT combines a depthwise-separable convolutional stem, a Tiny-Mamba state-space branch, and a lightweight local Transformer to capture transient, long-horizon, and multichannel degradation cues under batch-size-one inference. To improve auditability, temporal attention is projected to the frequency domain and softly aligned with analytical bearing fault-order bands. EVT calibration, dual-threshold hysteresis, and trimmed-tail fitting provide controllable false-alarm intensity even when healthy calibration data are imperfect. Experiments on CWRU, Paderborn, XJTU-SY, and an industrial pilot demonstrate that the proposed framework improves PR-AUC, reduces detection delay under a controlled nuisance-alarm budget, and remains robust to structured interference, metadata uncertainty, compound fault mixtures, and domain transfer. With a sub-1 MB footprint and Jetson p99 latency below 7 ms, the framework supports calibrated and interpretable early warnings for IIoT predictive maintenance.
https://arxiv.org/abs/2601.21293
Segmenting the Circle of Willis (CoW) from Magnetic Resonance Angiography (MRA) is challenging due to complex topology and thin vascular structures that are prone to fragmentation. Standard Convolutional Neural Networks (CNNs) often fail to capture these topological constraints, resulting in "broken vessel" artifacts. To address this, we propose the Anatomically Conditioned Recurrent Refinement U-Net (AC2RUNet). Our architecture decouples segmentation into two streams: a Static Stream that extracts invariant anatomical features and a lightweight Dynamic Stream that iteratively refines topological errors over time. We further introduce a dynamic curriculum learning strategy that transitions from high-recall geometric supervision to topology-aware constraints. Validated on the TopCoW dataset, AC2RUNet substantially reduces Hausdorff Distance (4.72 mm vs 9.17 mm) and Betti number errors (0.19 vs 0.40), improving topological connectivity over the nnU-Net baseline while maintaining comparable volumetric Dice.
https://arxiv.org/abs/2606.12319
Remaining Useful Life (RUL) prediction is essential for industrial predictive maintenance, yet many learning-based approaches rely on extensive feature engineering or large labeled datasets to train task-specific sequence models. In this work, we introduce a lightweight learning approach, in which we leverage a frozen pretrained time-series foundation model (TSFM) and combine it with a small regression head for RUL estimation from multivariate sensor streams. More specifically, we use Chronos-2 as a frozen backbone to extract context window features and train a lightweight regression neural network for RUL prediction. Experiments on real-world industrial sensor data from two device types show that Chronos-2 features consistently improve over recurrent, convolutional, Transformer-based, and gradient-boosting baselines under the same preprocessing and evaluation protocol. We further analyze the impact of context length and find that performance improves significantly with longer histories, indicating that TSFM representation offer a practical and data-efficient alternative for RUL estimation in industrial settings.
https://arxiv.org/abs/2606.11990
Precision agriculture requires the estimation of plant growth stages in real-time. When the plant growth stage is known, the wastage of resources in cultivation, such as nutrients and water, is reduced as only the required resources need to be supplied. Plants at different growth stages, however, have similar morphological features, which can make autonomous growth stage estimation difficult. This paper presents two feature extraction methods for growth stage estimation: one that uses a bank of Gabor filters and morphological operations, and the other that uses pre-trained convolutional neural networks (CNNs) and transfer learning. We test these methods on a publicly available plant growth stage dataset (``bccr-segset``) for two species, canola and radish, grown and captured under indoor conditions. The two proposed feature extraction methods are compared, using support vector machines and boosted trees as classifiers. We find that both methods are suitable for real-time applications, and that CNN features outperform the hand-crafted features, both with regard to speed and accuracy. The best system (VGG-19 features, classified with a radial basis function support vector machine) obtained an accuracy of 98.4% for both species, processing an image in 0.08 seconds.
https://arxiv.org/abs/2606.11966
Skin cancer is among the most prevalent malignancies worldwiAdbe satnradcitts early detection is essential for improving patient survival and reducing treatment costs Conventional dermoscopic and visual imaging techniques are primarily limited to the visible spectrum and often fail to capture subtle spectral signatures associated with early stage malignancies This study proposes an innovative framework that integrates a multispectral metasurface for imaging with a hybrid deep learning architecture based on Convolutional Neural Networks and Vision Transformers The designed metasurface enables noninvasive acquisition of rich spectral information highly sensitive to tissue alterations while the hybrid CNN ViT model simultaneously extracts local and global features to robustly classify skin lesions Simulation-based evaluations demonstrate that the proposed method achieves approximately 98 accuracy 95 percentages sensitivity and 99 perentage specificity surpassing conventional RGB-based and single-architecture approaches Qualitative analyses using attention maps reveal that the model focuses on clinically relevant lesion regions improving interpretability Overall the results indicate that combining metasurface based multispectral imaging with hybrid deep learning can introduce a new generation of diagnostic tools in dermatology and pave the way for portable fast and highly accurate clinical systems
https://arxiv.org/abs/2606.11287
This study aims to explore the performance of the VAR model in comparison with mel-frequency cepstral coefficient (MFCC) matrices and log-mel spectrograms using deep learning. In pulmonary sound classification, spectrogram-based representations suffer from inconsistent temporal dimensions due to varying respiratory cycle durations. Along with traditional trimming/zero-padding, adaptive-length windowing was presented to fix their temporal dimensions. Their spectral and temporal dimensions were optimized by testing a range of parameters. Different convolutional neural network (CNN) architectures were employed to extract features from the two-dimensional representations obtained over the sub-phases. The extracted sub-phase features were then fused using various strategies including direct concatenation, gated recurrent unit (GRU) network and GRU with attention mechanism. Model performances were assessed through respiratory cycle-based evaluation and subject-based evaluation comprising multiple respiratory cycles. Several data augmentation techniques were also studied to cope with limitations in data size. The best cycle-based F1-score (0.877) was obtained using the MFCC matrices with thirteen coefficients and 64-point time resolution per sub-phase representation followed by direct feature concatenation, and the best subject-based F1-score (0.855) was obtained using the MFCC matrices with thirteen coefficients and 256-point time resolution per full-cycle representation, both obtained by adaptive-length windowing. Augmentation degraded the performance of models overall, yet mixup augmentation was the best among the methods tested. MFCC outperformed log-mel spectrogram and VAR model in differentiation of asthma and COPD. Sophisticated fusion strategies did not improve the diagnosis. Augmentation did not contribute, demonstrating the significance of authentic data in pulmonary sound studies.
https://arxiv.org/abs/2606.10972
Multi-task vehicle routing problems play a critical role in enhancing efficiency across various industries and service sectors. These problems consist of multiple variants that optimize routing costs while meeting diverse customer constraints. Existing multi-task VRP solvers solely utilize a graph-based modality, limiting their ability to address variants with multiple constraints. As a format to represent complex semantics, vision modality shows great potential for encoding diverse VRP constraints. This motivates us to learn patch-level semantics from the vision images, and then integrate them into a graph-based model to solve various VRP variants simultaneously. However, directly applying this approach to multi-task VRPs presents three challenges: 1) existing VRP images lack constraint representations, which are essential for multi-task VRPs, 2) the fixed receptive field of individual patches cannot effectively accommodate varying requirements across tasks, and 3) imbalanced pixel distribution among constraints may cause the model to overlook constraints with fewer pixels. In this paper, we propose a vision-assisted foundation model (VaFM) to address these challenges. In the vision modality, input images tailored to all constraints are encoded by a convolutional neural network. The obtained patch embeddings are fused with graph-based nodes to generate solutions, with an auxiliary task designed to address the pixel-imbalanced issue. The performance of VaFM is evaluated across 16 different VRP variants. The experimental results demonstrate the superiority of VaFM over state-of-the-art methods, especially for variants with complex constraints.
https://arxiv.org/abs/2606.10431
Speech Emotion Recognition (SER) aims to identify a speaker's emotional state from audio signals. While recent advances in deep learning have significantly improved SER performance in Indo-European languages, Arabic SER remains underexplored and challenging due to dialectal diversity, limited annotated datasets, and the difficulty of modeling both local spectral cues and long-range temporal dependencies. To address these limitations, this study investigates whether hybrid architectures that jointly model spatial and contextual information can improve emotion recognition in Arabic speech. We propose and evaluate a comparative framework involving three architectures: a CNN-LSTM model, a CNN-Transformer model, and a fine-tuned wav2vec 2.0 model. The first two models leverage MFCC and spectrogram-based representations, while wav2vec 2.0 operates directly on raw audio through self-supervised representations. Experiments conducted on the EYASE and BAVED datasets demonstrate that the proposed CNN-Transformer architecture significantly outperforms the other models, achieving an accuracy of 98.1 percent. This result highlights the effectiveness of combining convolutional feature extraction with Transformer-based global context modeling. The main contribution of this work lies in providing a systematic comparison of hybrid and self-supervised approaches for Arabic SER, and in demonstrating that CNN-Transformer architectures offer a robust solution for capturing both spectral and long-range dependencies in low-resource and dialectally diverse settings.
https://arxiv.org/abs/2606.10278
An improved GAN-based imaging logging image restoration method is presented in this paper for solving the problem of partially missing micro-resistivity imaging logging images. The method uses FCN as the generative network infrastructure and adds a depth-separable convolutional residual block to learn and retain more effective pixel and semantic information; an Inception module is added to increase the multi-scale perceptual field of the network and reduce the number of parameters in the network; and a multi-scale feature extraction module and a spatial attention residual block are added to combine the channel attention. The multi-scale module adds a multi-scale feature extraction module and a spatial attention residual block, which combine the channel attention mechanism and the residual block to achieve multi-scale feature extraction. The global discriminative network and the local discriminative network are designed to gradually improve the content and semantic structure coherence between the restored parts and the whole image by playing off each other and the generative network. According to the experimental results, the average structural similarity measure of the five sets of imaged logging images with different sizes of missing regions in the test set is 0.903, which is an improvement of about 0.3 compared with other similar methods. It is shown that the method in this study can be used for the restoration of micro-resistivity imaging log images with good improvement in semantic structural coherence and texture details, thus providing a new deep learning method to ensure the smooth advancement of the subsequent interpretation of micro-resistivity imaging log images.
https://arxiv.org/abs/2606.10200
Wildfire detection and monitoring are critical for mitigating fire spread and reducing environmental and infrastructural damage. In this work, we introduce GWFP (Global Wildfire Prevention Dataset), a large-scale, open-source dataset of wildfire images and videos designed to support early fire and smoke detection research. GWFP contains geographically diverse wildfire scenes, including flames, smoke, Waterdog/Fog environmental conditions, Near Infrared (NIR) imagery, Ember, and challenging negative samples collected from real-world scenarios worldwide. To evaluate dataset robustness and cross-domain generalization, we benchmark multiple convolutional and transformer-based architectures across both in-domain and cross-dataset settings. Additionally, we explore lightweight frequency--spatial feature interaction using Hadamard-enhanced residual connections (HTE-ResNet) to analyze representation robustness under domain-shift conditions. Experimental results demonstrate strong cross-dataset generalization and practical utility for real-world wildfire monitoring applications. The dataset and source code will be publicly released upon acceptance.
https://arxiv.org/abs/2606.10174
With AI increasingly deployed in safety-critical systems, providing formal robustness guarantees for the underlying models is essential. Existing verification methods either rely on overly conservative approximations or incur prohibitive computational costs. For example, the use of lp-norm perturbations in video settings encodes the belief that the adversary can inject noise in every video frame. In practice, adversarial perturbations exhibit structured spatial and temporal correlations, constrained to lower-dimensional, semantically meaningful subspaces. In this work, we study robustness verification of 3D CNNs processing video and volumetric inputs, targeting applications in action recognition (UCF-101), autonomous driving (Udacity), and medical imaging (MedMNIST) exploiting realistic assumptions on adversarial strength by modelling them as spatio-temporal constraints - where the attacker can modify either a subset of frames or patches within a set of consecutive frames. We demonstrate that modelling realistic constraints enables tighter approximations. We introduce Spatio-Temporal Bound Propagation (STBP), a verification framework that computes an exact closed-form characterization of the first convolutional layer and propagates certified bounds through subsequent layers using scalable approximations. Computing the exact closed form provides the tightest bounds for the first convolutional layer. Thus, we utilise approximation methods in the remainder of the network. To spur further progress in this field, we propose ST-Bench, a verification benchmark for autonomous driving and activity recognition, to systematically evaluate verifiable robustness. Compared to existing verification-based approaches, STBP provides stronger robustness guarantees with significantly improved scalability, achieving 1.7x higher certified robust accuracy under identical perturbation budgets.
https://arxiv.org/abs/2606.09746
Muon has recently emerged as a state-of-the-art optimizer for pretraining Large Language Models (LLMs) and vision classifiers. Despite its efficiency advantage over Adam and SGD, the feature-learning advantage of Muon remains unclear. This paper investigates Muon's feature-learning advantage through the lens of robustness and transferability. First, by evaluating pretrained models on corrupted images and texts, we show that features learned by Muon are consistently more robust than those learned by Adam and SGD across different architectures, including transformers and Convolutional Neural Networks (CNNs). Using trained layer-wise probes, we further show that this robustness advantage is reflected in larger logit margins across layers. Second, by training linear classifiers or fine-tuning full models from pretrained parameters on downstream tasks, we demonstrate that Muon-learned features transfer more effectively than those learned by Adam and SGD. This transferability advantage is further supported by the diversity of hidden states across layers, as measured by effective rank. Finally, in a representative classification problem with multi-component features, we prove that Muon attains larger margins and higher effective rank than Adam and SGD, providing theoretical support for our empirical findings.
https://arxiv.org/abs/2606.09658
Humans rely on spatially dense, geometry and force-aware tactile feedback at high temporal resolution for dexterous manipulation. While vision-based tactile sensors enable dense force estimation, they are limited by camera frame rates, motion blur, and data bandwidth. Event-based optical tactile sensors offer an attractive alternative with microsecond temporal resolution and low motion blur, but existing methods are restricted to predicting only net forces. We introduce the first framework for dense 3D force field reconstruction using event-based optical tactile sensors. Our approach estimates 3D surface displacements from event data and maps them to forces via the inverse Finite Elements Method (iFEM). Shear displacements are recovered through the proposed event-based marker tracking algorithm, while normal displacements are predicted by a convolutional neural network trained on a collected dataset of synchronized force-displacement-event data. Experiments demonstrate accurate reconstruction of physically grounded forces, achieving a mean absolute error of (0.14 N, 0.10 N, 0.93 N) over force ranges up to (4 N, 4 N, 20 N), while operating at an average of 100 Hz. This work constitutes a first step toward enabling dense force feedback for high-frequency control in robotic grasping and dexterous manipulation.
https://arxiv.org/abs/2606.09451
Formal neural network verification -- proving that a network satisfies safety properties for \emph{all} inputs in a specified domain -- is bounded in practice by GPU memory: standard implementations of bound-propagation algorithms (IBP, CROWN, $\alpha$-CROWN) require weight and relaxation-coefficient matrices to reside entirely on one accelerator. We adapt two parallelism techniques originally developed for large-scale model training to the \texttt{auto\_LiRPA}\,/\,$\alpha,\beta$-CROWN verification framework. \textbf{Tensor Parallelism (TP)} shards both weight and $A$-matrices across GPUs, achieving ${\approx}2\times$ peak-memory reduction at $P{=}2$; soundness is confirmed on VNN-COMP 2022 MNIST-FC benchmarks, though bound tightness degrades with the number of sharded zones due to forced IBP substitution for intermediate bounds inside sharded zones. \textbf{Fully Sharded Data Parallelism (FSDP)} shards only weight matrices with a per-layer \texttt{AllGather}, producing bounds that are \emph{bitwise identical} to the single-GPU baseline: baseline memory drops by 80--90\%, peak memory by 34--39\% on wide MLPs. FSDP integrates cleanly with complete verification ($\beta$-CROWN + Branch-and-Bound) and with convolutional layers (\texttt{BoundConv}); a complete \emph{unsat} result is obtained for CIFAR-100 ResNet-large (VNN-COMP 2024) under FSDP. Across all experiments the memory bottleneck in $\alpha$-CROWN+BaB mode proves to be per-neuron alpha tensors, not weight matrices, pointing to the key direction for future work.
https://arxiv.org/abs/2606.09377